SAS Drives Not Detected
Please rate the helpfulness of this article 5 4 3 2 1 × Back SELECT YOUR COUNTRY/REGION Remember my country/region & language selection Selecting a different country will clear your cart To start viewing messages, select the forum that you want to visit from the selection below. ** If you are logged in, most ads will not be displayed. ** Linuxforums now Note: Some SAS BIOS have a system setup that is not contained within the normal motherboard BIOS. Other Tips Confirm the SAS channels are enabled.
SATA hard drive not recognized via USB steve54321May 16, 2015, 8:31 PM This sounds a very basic concept but I am really confused. You would have to back up the data, replace the drives, createa larger array, then restore the data. How should I go about this? Mount the drive to the carrier or tray provided by the host system using four 6-32 UNC screws. http://knowledge.seagate.com/articles/en_US/FAQ/218751en
How To Format Sas Hard Drive
Posted by theflash1932 on 10 Mar 2016 16:56 Verified Answer Verified by KozPeace KozPeaceI've heard that hot spare is not a good backup system and using RAID system is more efficient The drives in your RAID 1 will be listed as Primary and Secondary. take Disk 1 and put new 1TB and then SAS Controller to tell it's part of RAID 1?
- Posted by DELL-Daniel My on 16 Feb 2013 15:52 director87Is there anywhere on the web that might show a list of HDD combatible for my machine?
- It is not necessary to set any jumpers, terminators, or other settings on this drive for proper operation.
- Problem: Computer does not seem to recognize the drive.
- solved Connected 4TB External hard drive formatted Exfat via sata and the partition is not showing up.
- Events Engage with our story face to face.
- Not a member yet?
- As the system starts, the auto-detect feature may display the drive model number on screen.
- Make sure the drive makes firm contact with the host’s SAS backpanel connector.
- If not, reboot and enter the BIOS (usually the Del or F1 or F2 key).
Please refer to your system or SAS host adapter (controller) manual for information about formatting and setting up the drive for use with your particular operating system. The Barracuda is not just "non-certified", but it is also not enterprise-class, which can introduce a whole new set of problems and are really not suitable for use on RAID controllers. Have you checked the output of dmesg for any hints?, e.g.: Code: dmesg|grep sd Is it possible to download and boot the CentOS 6.0 LiveCD, to see if the updated kernel How To Wipe Sas Drive Thanks, Like 0 Reply You have posted to a forum that requires a moderator to approve posts before they are publicly available.
Can't find your answer ? How To Connect Sas Hard Drive To Pc DELL.COM > Community > Support Forums > Servers > PowerEdge HDD/SCSI/RAID Forum > New HDD not being recognized by SAS controller on PowerEdge T410 Shop > Home & Home Office > Hard drive only recognized via usb suddenly solved Windows 7 repeatedly asking to reformat internal hard drive connected via sata to usb connector (like an external) Do all Hard Drives work https://community.hpe.com/t5/ProLiant-Servers-ML-DL-SL/Help-harddisk-sas-not-detected-when-install-windows-2008-r2/td-p/6512244 Since it's getting full, I would like to upgrade and use 2x 2TB instead.
The drive does not show up as an option in hot spare or in SAS topology, therefore I'm assuming the controller cannot communicate with it. Sas Controller Card For Pc I powered off the machine and swapped the failed drive with the new one (cable connections) When I boot into Sas controller (SAS 6 ir) it shows that the drive is KozPeace On another note, I have a windows 2008 R2 server with two 500GB. At the moment when I reboot, it says both drives are degraded and get 78 and 79 error, but it boots to Disk 0 fortunately.
How To Connect Sas Hard Drive To Pc
HDD The leading standard in enterprise capacity and performance SSD Flash-based storage for instant access to data Systems Building the highest performing and scalable data storage infrastructure possible Trends Data Age Most SAS host systems provide a way to insert the drive using a carrier or tray, which allows the drive to be hot-plugged into the system. How To Format Sas Hard Drive You should see a list of all of the drives the controller detects. Sas Controller Driver For Windows 7 If I do need SAS controller, where to put this controller?Thanks 2 answers Last reply May 17, 2015 Best Answer May 17, 2015 More about sas sata hard drive recognized usb
Vision Our story from Seagate’s thought leaders. Unlike (Parallel) SCSI, there is no need to set an ID, since each drive connects directly to its own port and since the controller will assign all IDs. The new drive should not have anything in the "Drive Status" field. Posted by director87 on 16 Feb 2013 15:36 Thank you. Sas Host Adapter Setup Utility
If you don't see it in SAS Topology then it does not appear the controller is able to properly communicate with this drive. A better option than a hot-spare is double redundancy, as exists with a RAID 6 (and sometimes RAID 10). Installation instructions Mount the drive in the host system carrier or tray. If you do not see the drive in that list then check the SAS Topology screen.
Still shows "drive status: missing" Do I have to buy dell certified drives? Sas To Sata Adapter Not Working So I am kind of worry that the other one goes down..can't effort.. What is more, SATA drives can be connected to the same controller as SAS drives if the controller has ports for that (though connecting a SAS drive to a SATA controller
Results 1 to 6 of 6 Thread: SATA SAS Hard drive is not detected Thread Tools Show Printable Version Email this Page… Subscribe to this Thread… Display Linear Mode Switch to
RAID's purpose is to protect the availability of the server and its data and services and/or increase performance and/or capacity of a storage system. All Replies Posted by DELL-Daniel My on 16 Feb 2013 14:22 Verified Answer Verified by director87 Hello director87 Go to RAID Properties>Manage Array>Manage Hot Spares. Backup isa separate topic. Sas To Usb Pressing F6 as previously described may or may not be required.
If the controller does not detect the drive, look to confirm that all SAS ports are enabled. Register. 09-16-2011 #1 kmlrao View Profile View Forum Posts Private Message View Articles Just Joined! How to transfer data from laptop hard drive via SATA to USB How to get files from other pc hard drive via a SATA to USB cable recovering data from a Keep the drive in its antistatic container until you are ready to install it.
Insert the drive Slide the carrier or tray into the appropriate bay in your host system. Test another drive in the same port or bay if possible. Or is the RAID controller out of date? Thanks Daniel MysingerGet Support on Twitter @DellCaresPro Download the Dell Quick Resource Locator app today to access PowerEdge support content on your mobile device! (iOS, Android, Windows) Like 0 Reply You
How should I go about this? Isn't the SATA-to-USB adapter supposed to convert to USB signal? A hot-spare can help support that purpose.