Home > Screen Resolution > Screen Resolution In WinPE 5.0 On UEFI Devices

Screen Resolution In WinPE 5.0 On UEFI Devices

Contents

Craig Top Login to post comments Wed, 2016-11-30 20:48 #190 Mustang Online Acronis MVP Volunteer Joined: 2009-08-17 Posts: 1158 Craig, see my guide for help with drivers. First they get: Then SCCM 2012 SP1 errors when downloading updates Currently using SCCM 2012 SP1 with CU2 and I am having some update download issue with Automatic Deployment Rules. This doesn't explain why this would occur after running 'chkdsk', however, please look in your PC BIOS settings for 'Secure Boot' and toggle the setting from its current state to see Find: The result is just like: About the root cause, there would be something wrong with the WinPE http://elizabethandrew.org/screen-resolution/screen-resolution-changes.html

The problem with this is that while it may be fine for one specific device, it is not fine considering different displays and video controllers if you have to manage many Below is a screenshot of a successful dynamic UEFI video fix. Obviously,thehardwarecan't possibly work normally without the required device driversbeing loaded.It may be just insufficient WinPE "scratch space", but it sure looks to me as if the underlyingissues involved go much deeper Quote Post Reply 1 2 3 4 5 Share Subscribe RSS Back To Top Similar Topics Post Quoted Reply Reading This Topic Powered by InstantForum 2015 Final © 2017 Execution: 0.000. https://social.technet.microsoft.com/Forums/en-US/9676f52d-d145-49de-9cf1-0983a4ab840f/screen-resolution-in-winpe-50-on-uefi-devices?forum=w8itproinstall

Winpe Uefi Resolution

But how any of them or all of them togethermight affect screen resolution, whether through WinPE build corruption or otherwise, is beyond my ability to guess, especially with MFT issues tossed Those parameters are set by the WinPE builder and so you'd need to ask Macrum about how their "wizard" handles that directly. I also referred to the article from Johan http://www.deploymentresearch.com/Research/tabid/62/EntryId/51/Setting-screen-resolution-in-WinPE-4-0.aspx Below is my setup: MDT 2013Windows 8.1 x64Lenovo Thinkpad Tablet 10 (UEFI) Tried the below but no luck: Changed the ColorDepth to What was your resolution? (Pun intended) I have this question too 0 Kudos Reply pjorgensen Lenovo Employee Posts: 219 Registered: ‎06-09-2015 Location: US Message 2 of 5 (663 Views) Re: MDT

  1. The official word is that it is behaving as designed, thus it is our (implied) responsibility (as programmers) to work-around this behaviour.
  2. See the attached screen capture.
  3. Data Backup and Disaster Recovery Software.All Rights Reserved.

That creates other problems, but it indicates to me that loading these drivers shouldn't be necessary. If you do, please post the results. Sorry. Winpe Change Resolution Command Line Will try a reinstall - if that has no effect, I will just have to live with it in Win 10 1511 until my Win 10 AU issue is resolved (laptop

Sign In Sign In Remember me Not recommended on shared computers Sign in anonymously Sign In Forgot your password? Yes, you may need to take ownership and change permissions (again temporarily) in order to do so.As for the"wizard"copying to the rescue media, I still don't have that reported copy failureissuefigured BTW you should be aware that SetRes does not work in Windows 10, it returns an error stating that it can't run in this version of Windows (Windows 10). Open the Windows Device Manager (from control panel or run devmgmt.msc) and selectyourvideo deviceunder Display Adapters.2.

Edited 19 August 2016 3:56 PM by Arvy Quote paulderdash paulderdash Posted 19 August 2016 5:22 PM New Member Group: Forum Members Last Active: 15 October 2016 11:15 AM Posts: 31, Winpe Default Resolution The resolution is all wrong and it is unusable.I am using the WinPE 10 64-bit and the rescue media looks and works fine.I have tried rebuilding the WinPE and running the Amateur Radio K0LO

Top Login to post comments Mon, 2016-08-08 03:00 #181 Mustang Online Acronis MVP Volunteer Joined: 2009-08-17 Posts: 1158 I found another way to set the screen resolution in Top Login to post comments Sat, 2016-08-06 03:26 #169 Mustang Online Acronis MVP Volunteer Joined: 2009-08-17 Posts: 1158 I have no problem changing the resolution in MustangPE booted in UEFI mode

Winpe 10 Uefi Screen Resolution

Go to Solution. click for more info To be clear, the issue does not exist in WinPE when booting from DVD or UFD - even without the video drivers.And rescuepe.log still looks like this:Macrium Reflect Boot Log------------------------Started 2016/09/07 Winpe Uefi Resolution I just had this reported to me.  When users go into a document repository and edit the properties after saving it DELETES THE FILE!!!!!!!!.  This just started happening so I have Winpe 10 Screen Resolution I used a USB 3 ethernet dongle attached to a USB hub and a USB keyboard.   Select the LAN connection using your external keyboard or use the up/down volume control

Though it doesn't happen in 1607 image. http://elizabethandrew.org/screen-resolution/screen-resolution-out-of-whack.html At about 3/4 trough it quits saying it can't access the destination. I see a similar question posted on technet for screen resolution in WinP Server failed to start: The domain path does not match the running server Hi, I've configured Eclipse to You can use the TI 2015 plugin if you make a simple modification: 1. Uefi Pxe Boot Resolution

One is don't trust PnP 4 Re: Windows 7 Install wont work - USB Keyboard and Mouse not working 2 Re: Update Retriever fails with "Please try later" 1 Re: Update The resolution issue exists only in MR boot recovery menu WinPE, not when booting from the rescue media DVD. Download the script The PowerShell script to dynamically install the video driver is available here  PowerShell.zip   1.89KB   143 downloads. this contact form Privacy statement  © 2017 Microsoft.

Will proceed. Winpe 10 Resolution It's easy! By paulderdash - 1 September 2016 7:33 AM Log file looks like this:Macrium Reflect Boot Log------------------------Started 2016/08/31 6:05 PM v6.2.1502DrvLoad: Unable to load x:\drivers\igdlh64.inf_amd64_69885addc92dcf91\igdlh64.inf (Error 0x80070070).DrvLoad: Unable to load x:\drivers\Network\VEN_8086_DEV_08B2\netwbw02.inf (Error

Should I try uninstalling / reinstalling MR, and will it keep my settings and .xml files?I really would like to fix this as I make frequent use of the MR boot

It's clear that computer is not going to allow WinPE to change the resolution. When we close the seeded page by clicking see Screen resolution in WinPE 5.0 on UEFI devices Hi Can you please help me with the issue i am facing?  The screen Share this post Link to post Share on other sites Create an account or sign in to comment You need to be a member in order to leave a comment Create Uefi Pxe Resolution Make sure the New Group occurs before displaying any HTA.

I had some ideas on how to handle HTA font sizing, such as detecting the current resolution and using different CSS settings that match that viewpoint. My frustration level is getting me very close to returning it. Bigger fish to fry I suppose. navigate here No fix on the horizon as this is probably not something MS cares very much about.

This issue will only affect you if you are displaying HTA's while still in WinPE (Hyper Text Applications such as this one) and if those HTA's are bigger than the screen I don't have it on a 1607 image I've rolled back from.Restore via WinPE from within MR, and via DVD/USB works, so I will just have to live with it for Edit the Task sequence In the ConfigMgr console, in Software Library, Operating Systems, Task Sequences, right click and edit a previously created Deploy task sequence and add the following New Group,  This seems to be 640x480 with no option to change it to 1920x1080 under 'Other tasks' in that environment.

I'mnotsure why.* In any case, when younext boot to the rebuiltrescue media, it should then find and load the specialized drivers required forfully supporting your own video display as it did Top Login to post comments Sun, 2016-08-07 18:54 #178 Mustang Online Acronis MVP Volunteer Joined: 2009-08-17 Posts: 1158 As far as I can tell, WinPE based on the 10240 ADK will Is there a way to change this soit's easier to read and navigate? You can, however, check the rescuepe.log file to confirm whether the drivers were loaded correctly.

We'll see. By Arvy - 31 August 2016 2:28 PM In another forum thread, you asked me for some detailed instructions to get your own machine's video drivers loaded in Reflect's WinPE rescue Unable to load database

I'm still looking into that part of it. Nick was quicker than I. It was justmy last desperate attempt to make some logical sense out of a WinPE build that produces different results depending on whether it gets booted on a hard drive or I tried adding it to the root of the USB drive but it did not work.

Edit your task sequence and create a new Group   Open up your deployment task sequence (I used the CM12 BitLocker Frontend HTA available here) and create a new group called Depending on answers, the probable cause and solution are quite different. Is this the only solution? So I am pretty much puzzled what to do.It would be nice if Reflect whilst creating a rescue USB would figure out itself which files to take.p.s.