Home > Second Monitor > Second Monitor Via HDMI - Always Black

Second Monitor Via HDMI - Always Black

Follow the cable all the way to the computer and note where it is plugged in. I switched because I have a second monitor now that only has VGA and DVi so I moved my DVi to that monitor and bought an HDMi for my newer one. I'm new to this site and I am seeking help. You can disable the Energy Saving Mode in Windows 7 and 8 by doing the following: Click Start, then type in "power options" (no quotes), then click the Power Options link this contact form

Since the laptop does not have a DVI-D port, I have connected a DVI-D to HDMI connector on the laptop end and inserted the cable in HDMI port of the laptop.. Start Menu 2. If you have any questions, feel free to comment. Using component connections I don't have that problem. http://en.community.dell.com/support-forums/laptop/f/3519/t/20001402

Simply put: both DVI and HDMI are digital signals; if the signal is too weak, the monitor won't sync to the computer, resulting in a blank screen. share|improve this answer answered Jun 21 '14 at 15:58 BruceM 111 add a comment| up vote 0 down vote I had the same problem with a Dell U2515H screen that turned Web searches at the time confirmed this a common problem, but seen only on the then-new Windows release I was running and could be traced to Dell having dropped support and

A 'Windows Mobility Centre' window will appear. 3.) Select 'External Display'. If you still have the DVI cable, I'd go back to using it. With over 30 years of computing experience, Dennis' areas of expertise are a broad range and include PC hardware, Microsoft Windows, Linux, network administration, and virtualization. I have adjusted the monitor settings to show as full screen, and also tried to adjust manually but nothing works.

Assuming that the cables are plugged in securely, power on the monitor and check to see if the monitor keeps going black. The beeps can also be related to the motherboard, video card, etc. The "Change Screen Saver Settings" window will appear. No problems at all....

Send me a message on the bottom left of the screen (using the Zopim Chat button), or click my picture to read more about how I can fix your computer over This only happens with certain themes not all of them... Well, I tried to simply shut down the TV, but this did not help. Permalink Submitted by fpk473_6127 on Thu, 12/31/2015 - 16:46 I have a brand new monitor and was having this problem.

  • I kindly ask at this point please do not email me "What do I do next?" if you have a monitor problem, as I will simply refer you to this article.
  • I switched because I have a second monitor now that only has VGA and DVi so I moved my DVi to that monitor and bought an HDMi for my newer one.
  • The thing it's as other guys: I have two new monitors and everything tested.

Then I'm rebooting the PC with external monitor unplugging during RAM calculation... check it out YOU NEED TO UPDATE YOUR VIDEO/GRAPHICS DRIVER/FIRMWARE, VERY SIMPLE. I have in my new laptop:i5-6300nvidia gtx 960m16 gb ddr4 Anybody have any idea what is wrong? If the cable run is too long, or of the signal has been split (using a non-powered DVI or HDMI splitter), this can cause the monitor to go black because the

The main thing here is to check for any warning lights or unusual beeps when you power on your computer. weblink Chillout Room No display via HDMIHELP!!!! In Windows is corrupt, then your only option is to boot into safe mode and then try to repair Windows either using System Restore/Automatic Repair or using the Reset or Refresh My Without the HDMI lead connected to your laptop - !.) Go to 'Settings', - 'Control panel', - 'Hardware and Sound'. 2.) now select 'Adjust commonly used mobility settings'.

Use the monitor as you would normally after updating the driver to see if that fixes the problem. Until we updated to 8.1. A 'Windows Mobility Centre' window will appear. 3.) Select 'External Display'. navigate here Reply to Halug m 0 l officestar July 23, 2015 1:00:01 PM IT WORKED!!!!!!!!

Reply to officestar m 0 l gregorymhutchinson August 16, 2015 6:22:48 PM dewlight said:So my boyfriend has a HP laptop with windows 8 on it, we use it & an HDMI Microsoft: Windows 10 Will Be The Last Version Does Windows 10 require the CPU to support PAE? I can help!

Otherwise, I wouldn't be able to plug the cable in.

I had the same problem not an IT tech but was able to do it. I've tried holding Y and the right trigger to reset the display settings but nothing changes. LittleRedPCMay 5, 2016, 4:33 AM misteriosly said: What video card are you using, what windows.Probably its switching your main display, which is somewhat normal.You should go to screen settings and extend Hope that helps.

If you still have the DVI cable, I'd go back to using it. Lastly, you should also make sure that the input source on your monitor is set to the correct input. Instead of just unplugging the television, try switching your main display (laptop) to the primary and only display whenever you want to switch. his comment is here After doing this both my laptop and tv were showing the same info.

Password Advanced Search Show Threads Show Posts Advanced Search Go to Page... My monitors are black, the PC is booting to some level and than probably rebooting and so on. Kkkk1Sep 17, 2013, 11:19 AM Hi guys,I used a DVi from my 7970 Ghz to my 24" iiyama prolite E2473HDS with no problems. I've tried the whole windows button plus p thing and changing resolutions but I don't know or like windows 8 so I'm kind of at a loss at what to do.

Restarting may fix the problem, but it'll happen again. That being said, why are you using VGA at all? Enjoy! My sound card recently stopped making any sound, no matter what I tried.